2.Die head diameter:80mm,100mm,2.2mm of die lip gap.
3.Heater of die head: Stainless steel mica heater.
4.Material: Alloy and Steel, forging and heat treatment.
5.Die head flowing plate hard chromium and buffing.
C. Double lip air ring, 1 set
a. Blower: High pressure and low noise; blower power: 2.2kw
b. With YASAKWA inverter.
D. Foam stabilizing frame 1 set
E. Take-up unit (Traction device)
1. Upper take-up device, 1 set
2. The second traction, 1 set(with rubber rolls, steel rolls and torque motor control)
3. Plywood device ( Tower),1 set
4.Traction rolls turn on/off type: driving by air cylinder
5.Traction motor:0.75kw,YASAKWA inverter.
F. Winding type: Constant tension control Single winding
1.Winding motor, 0.75kw,1 set, YASAKWA inverter.
2. Max film width: 600mm
3.Max roll diameter on the winding:800mm
G. Electrical equipment
1.Inverter: Yaskawa inverter
2.Temperature control device: RKC temperature control device.
3.A relay, contactor: Schneider / Omron
The result is high Speed extrusion, best shearing and mix melting could make the plastic full plasticized. Also enhanced the film’s tension of horizontal and vertical. High output and strength of technology than others, is a really high speed blowing film machine.
1.Screw using the most advanced alloy spray technology, precision machining, hardness, corrosion resistance and better, long life, nitrogen treatment screw life 2 to 3 times.
2 screw length, plasticizing capacity, uniform temperature distribution, automatic temperature control, light blown film performance of uniform products;
3. compact structure, smooth operation, single-arm structure, economical and practical, the traction device integration and can self-tune movements;
4, using advanced inverter technology, energy efficient;
5, curled in various forms, can be arbitrarily chosen; 6, users can configure the rotating head.